LED Media Facade

MCO Series Transparent Mesh LED Media Facade

ZONEPRO MCO series transparent mesh LED screen is dedicated to building exterior media facade installation. 35%-70% high transparency, no blockage of indoor natural light & outdoor views, ultra-light 21kg/㎡, max 10,000nits high brightness, IP65 waterproof, low power consumption, perfect for commercial building curtain walls, landmark facades, mall glass exteriors.

MCO Series Transparent Mesh LED Media Façade

MCO LED Media Facade is a professional outdoor transparent mesh LED screen engineered exclusively for modern building glass curtain walls and architectural facades. Unlike conventional opaque LED walls, this transparent mesh LED display adopts hollow mesh structural design with 35%~70% light transmittance, fully retaining indoor daylight penetration and unobstructed indoor-outdoor sightlines without blocking natural scenery or building lighting effects.

As a lightweight architectural LED media wall, MCO transparent mesh LED screen weighs merely 21kg per square meter—60% lighter than traditional solid LED panels, drastically lowering building load-bearing requirements and simplifying exterior wall mounting construction. Equipped with DIP347 high-brightness LEDs and built-in long anti-glare louvers, the facade LED screen reaches 8,000–10,000 nits peak brightness with ultra-high contrast ratio, delivering vivid, glare-free video content even under direct strong sunlight all day long.

This outdoor transparent LED mesh facade boasts IP65 front / IP54 rear ingress protection, fully waterproof and dustproof for all-year outdoor use. Featuring natural air convection heat dissipation, no extra air conditioning cooling devices are required, realizing energy-saving, eco-friendly and stable long-term operation. The refresh rate hits ≥3840Hz to eliminate screen flicker, ensuring smooth broadcast-grade image playback for commercial advertising, brand dynamic display and architectural art lighting effects.

Core Advantages：

1. Ultra-High Transparency 35%–70%

Mesh hollow structure reserves natural light transmission, indoor staff can enjoy outdoor views normally, no darkening or light blocking issues on glass curtain walls; ideal for office buildings, shopping malls, hotel exterior facades that pursue both display effect and architectural permeability.

2. Ultra-Lightweight Design, Low Building Load

Only 21kg/㎡ cabinet weight, 60% lighter than non-transparent LED panels. Galvanized sheet metal cabinet structure reduces engineering reinforcement costs for building exterior installation.

3. 10,000 Nits Max High Brightness & High Contrast

Custom DIP347 high-luminance LEDs matched with built-in long shading louvers suppress ambient light interference, maintaining sharp color contrast under strong outdoor sunlight, readable in day and night.

4. Low Power Consumption & Superior Heat Dissipation

Average power consumption only 120W/㎡, maximum peak power 360W/㎡. Mass floating air gaps between modules realize passive natural heat dissipation, no extra cooling equipment needed, cut long-term operation energy cost.

5. Full Outdoor Weather Resistance IP65/IP54

Front side IP65 waterproof, dustproof, anti-rain splash; rear IP54 protection for daily outdoor climate challenges, stable performance in rain, wind, high temperature environment.

6. 3840Hz High Refresh Rate, Flicker-Free Visuals

≥3840Hz ultra-high refresh rate eliminates screen flicker, suitable for long-time video playback, live broadcast, high-definition brand promotional content display.

7. Rear Access Maintenance, Easy On-Site Repair

Rear maintenance design allows single module disassembly and replacement without removing the whole screen, greatly lowering later maintenance time and labor cost for large-area building facade projects.

8. Wide Viewing Angle 120°(H) / 100°(V)

Horizontal 120°, vertical 100° ultra-wide viewing angle, consistent bright and clear images from all pedestrian viewing angles around buildings.

Main Application Scenarios (Boost Long-Tail SEO Keywords)

· Commercial office building glass curtain wall media facade

· Shopping mall atrium & exterior transparent LED advertising screen

· Hotel, landmark complex exterior architectural lighting display

· High-rise retail storefront transparent mesh LED wall

· City landmark outdoor dynamic media facade project

· Commercial complex glass exterior brand digital signage

Complete MCO Series Technical Specifications Table：

Q1: What is MCO transparent mesh LED media facade used for?

A1: MCO transparent mesh LED screen is specially designed for building exterior glass curtain walls and architectural media facades. It retains building permeability without blocking indoor light and outdoor views, widely used in office buildings, shopping malls, hotels and city landmark exterior digital display projects.

Q2: How transparent is the MCO series transparent LED mesh wall?

A2: Transparency rate ranges from 35% to 70% across all models; MCO-25/50 reaches the highest 70% transmittance for maximum light penetration.

Q3: Is this transparent mesh LED screen suitable for outdoor all-weather use?

A3: Yes. Front IP65 waterproof and dustproof protection supports long-term outdoor installation, resisting rain, wind and daily temperature changes.

Q4: Does the MCO LED facade need extra cooling air conditioners?

A4: No. The hollow mesh structure forms natural air circulation for passive heat dissipation, eliminating extra cooling equipment and saving energy costs.

Q5: How heavy is the MCO transparent LED cabinet?

A5: Most models weigh only 21kg per square meter, 60% lighter than traditional solid LED panels, reducing building load-bearing pressure greatly.